News
How to inspect a rigid endoscope-Visual Inspection
Visual Inspection
()
Check the body by examining the whole scope closely for cracks or other irregularities.
Look closely through the tip to verify that the lens is not foggy or cracked.
Visually check if light is passing through the scope by using a basic light source.
See if there are any possible fiber optic deficiencies by lifting the scope and looking through the tip, reverse the side and do the same. Make sure there is light passing through the scope during the whole time.
Make sure the 2 light source connector sleeves screw on and off smoothly, with no resistance.
6.Next, grab a very small written text, because the scope is with a 30 degrees lens in this case, look through it under an angle so you can see properly.
Look from approx. 25 mm (1 inch) distance and see if visibility is clear and bright enough or foggy and dark.
Imagex Meditech---- Medical Rigid Endoscope Manufacturer www.82tech.com
Send Email
WhatsApp